前言 网站是前后端分离,前端打包站点部署需要自力更生,为了避免跨域问题.
选择了nginx这个知名的反向代理服务器.
这里不探究安装这种问题。。。 版本 : nginx-1.11.10
- #user nobody; # 用户权限
- worker_processes auto; # 工作进程的数量
- #worker_cpu_affinity auto;
- #全局错误日志及PID文件
- error_log logs/error.log; # 日志输出
- #error_log logs/error.log notice;
- #error_log logs/error.log info;
- #pid logs/nginx.pid;
- events {
- #epoll是多路复用IO(I/O Multiplexing)中的一种方式,
- #use 设置用于复用客户端线程的轮询方法。如果你使用Linux 2.6+,你应该使用epoll。如果你使用*BSD,你应该使用kqueue。
- use epoll; # IOCP[window] , kqueue[bsd] , epoll[linux]
- #单个后台worker process进程的最大并发链接数
- worker_connections 1024;
- #multi_accept 告诉nginx收到一个新连接通知后接受尽可能多的连接。
- multi_accept on;
- # 并发总数是 worker_processes 和 worker_connections 的乘积
- # 即 max_clients = worker_processes * worker_connections
- # 在设置了反向代理的情况下,max_clients = worker_processes * worker_connections / 4 为什么
- # 为什么上面反向代理要除以4,应该说是一个经验值
- # 根据以上条件,正常情况下的Nginx Server可以应付的最大连接数为:4 * 8000 = 32000
- # worker_connections 值的设置跟物理内存大小有关
- # 因为并发受IO约束,max_clients的值须小于系统可以打开的最大文件数
- # 而系统可以打开的最大文件数和内存大小成正比,一般1GB内存的机器上可以打开的文件数大约是10万左右
- # 我们来看看360M内存的VPS可以打开的文件句柄数是多少:
- # $ cat /proc/sys/fs/file-max
- # 输出 34336
- # 32000 < 34336,即并发连接总数小于系统可以打开的文件句柄总数,这样就在操作系统可以承受的范围之内
- # 所以,worker_connections 的值需根据 worker_processes 进程数目和系统可以打开的最大文件总数进行适当地进行设置
- # 使得并发总数小于操作系统可以打开的最大文件数目
- # 其实质也就是根据主机的物理CPU和内存进行配置
- # 当然,理论上的并发总数可能会和实际有所偏差,因为主机还有其他的工作进程需要消耗系统资源。
- # ulimit -SHn 65535
- }
- http {
- include mime.types; #设定mime类型,类型由mime.type文件定义
- default_type application/octet-stream;
- #设定日志格式
- #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
- # '$status $body_bytes_sent "$http_referer" '
- # '"$http_user_agent" "$http_x_forwarded_for"';
- #设置nginx是否将存储访问日志。关闭这个选项可以让读取磁盘IO操作更快
- #access_log logs/access.log main;
- #sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件,
- #对于普通应用,必须设为 on,
- #如果用来进行下载等应用磁盘IO重负载应用,可设置为 off,
- #以平衡磁盘与网络I/O处理速度,降低系统的uptime.
- # 高效文件传输
- sendfile on;
- tcp_nopush on;
- tcp_nodelay on;
- # types_hash_max_size 影响散列表的冲突率。types_hash_max_size越大,就会消耗更多的内存,但散列key的冲突率会降低,检索速度就更快。types_hash_max_size越小,消耗的内存就越小,但散列key的冲突率可能上升。
- types_hash_max_size 2048;
- #连接超时时间
- #keepalive_timeout 0;
- keepalive_timeout 65;
- gzip on;
- gzip_disable "MSIE [1-6].";
- gzip_comp_level 6;
- gzip_min_length 1000; #置对数据启用压缩的最少字节数。如果一个请求小于1000字节,我们最好不要压缩它,因为压缩这些小的数据会降低处理此请求的所有进程的速度。
- gzip_proxied expired no-cache no-store private auth;
- gzip_types text/plain application/x-javascript text/xml text/css application/xml;
- #Buffers:另一个很重要的参数为buffer,如果buffer太小,Nginx会不停的写一些临时文件,这样会导致磁盘不停的去读写,现在我们先了解设置buffer的一些相关参数:
- #client_body_buffer_size:允许客户端请求的最大单个文件字节数
- #client_header_buffer_size:用于设置客户端请求的Header头缓冲区大小,大部分情况1KB大小足够
- #client_max_body_size:设置客户端能够上传的文件大小,默认为1m
- #large_client_header_buffers:该指令用于设置客户端请求的Header头缓冲区大小
- #设定请求缓冲
- client_body_buffer_size 10K;
- client_header_buffer_size 1k;
- client_max_body_size 8m;
- large_client_header_buffers 2 1k;
- map $http_user_agent $outdated { # 判断浏览器版本
- default 0;
- "~MSIE [6-9].[0-9]" 1;
- "~MSIE 10.0" 1;
- }
- # weight:轮询权值,默认值为1。
- # down:表示当前的server暂时不参与负载。
- # max_fails:允许请求失败的次数,默认为1。当超过最大次数时,返回 proxy_next_upstream 模块定义的错误。
- # fail_timeout:有两层含义,一是在fail_timeout时间内最多容许max_fails次失败;二是在经历了max_fails次失败以后,30s时间内不分配请求到这台服务器。
- # backup : 备份机器。当其他所有的非 backup 机器出现故障的时候,才会请求backup机器,因此这台机器的压力最轻。
- # max_conns: 限制同时连接到某台后端服务器的连接数,默认为 0。即无限制。
- # proxy_next_upstream : 这个指令属于 http_proxy 模块的,指定后端返回什么样的异常响应
- #负载均衡
- #upstream DataBase {
- # ip_hash; # 每个请求按访问ip的hash结果分配,这样每个访客固定访问一个后端服务器,可以解决session的问题。
- # server 10.xx.xx.xx weight=1 max_fails=2 fail_timeout=30s;
- # server 10.xx.xx.xx;
- # server 10.xx.xx.xx;
- #}
- server {
- listen 80; #端口号
- server_name v.fpdiov.com; #域名
- location /api { #代理API
- proxy_pass http://api.fpdiov.com:8090;
- # proxy_set_header Host $host;
- # proxy_set_header X-Real-IP $remote_addr; #在web服务器端获得用户的真实ip
- # proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
- proxy_redirect off;
- proxy_connect_timeout 600; #nginx跟后端服务器连接超时时间(代理连接超时)
- proxy_read_timeout 600; #连接成功后,后端服务器响应时间(代理接收超时)
- proxy_send_timeout 600; #后端服务器数据回传时间(代理发送超时)
- proxy_buffer_size 32k; #设置代理服务器(nginx)保存用户头信息的缓冲区大小
- proxy_buffers 4 32k; #proxy_buffers缓冲区,网页平均在32k以下的话,这样设置
- proxy_busy_buffers_size 64k; #高负荷下缓冲大小(proxy_buffers*2)
- proxy_temp_file_write_size 64k; #设定缓存文件夹大小,大于这个值,将从upstream服>务器传
- keepalive_requests 500;
- proxy_http_version 1.1;
- proxy_ignore_client_abort on;
- }
- location ^~ / {
- root /mnt/www/fpd-car-manage-frontend; #启动根目录
- if ($outdated = 1){
- rewrite ^ http://oisbyqrnc.bkt.clouddn.com redirect; #判断浏览器版本跳转
- }
- index index.html; #默认访问页面
- try_files $uri $uri/ /index.html;
- }
- }
- #server {
- # listen 80; #侦听80端口
- # server_name localhost; #访问域名
- #charset koi8-r; # 字符集
- #access_log logs/host.access.log main;
- #location / {
- # root html;
- # index index.html index.htm;
- #}
- #error_page 404 /404.html; # 错误页面
- # redirect server error pages to the static page /50x.html
- #
- #error_page 500 502 503 504 /50x.html;
- #location = /50x.html {
- # root html;
- #}
- #静态文件,nginx自己处理
- #location ~ ^/(images|javascript|js|css|flash|media|static)/ {
- #过期30天,静态文件不怎么更新,过期可以设大一点,
- #如果频繁更新,则可以设置得小一点。
- # expires 30d;
- #}
- # proxy the PHP scripts to Apache listening on 127.0.0.1:80
- #
- #location ~ \.php$ {
- # proxy_pass http://127.0.0.1;
- #}
- # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
- #
- #location ~ \.php$ {
- # root html;
- # fastcgi_pass 127.0.0.1:9000;
- # fastcgi_index index.php;
- # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
- # include fastcgi_params;
- #}
- # deny access to .htaccess files, if Apache's document root
- # concurs with nginx's one
- #
- #location ~ /\.ht {
- # deny all;
- #}
- #}
- # another virtual host using mix of IP-, name-, and port-based configuration
- #
- #server {
- # listen 8000;
- # listen somename:8080;
- # server_name somename alias another.alias;
- # location / {
- # root html;
- # index index.html index.htm;
- # }
- #}
- # HTTPS server
- #
- #server {
- #启用 https, 使用 http/2 协议, nginx 1.9.11 启用 http/2 会有bug, 已在 1.9.12 版本中修复.
- # listen 443 ssl;
- # server_name localhost;
- # ssl on;
- # ssl_certificate cert.pem; #证书路径;
- # ssl_certificate_key cert.key; #私钥路径;
- # ssl_session_cache shared:SSL:1m;
- # ssl_session_timeout 5m;
- # ssl_ciphers HIGH:!aNULL:!MD5; #指定的套件加密算法
- # ssl_prefer_server_ciphers on; # 设置协商加密算法时,优先使用我们服务端的加密套件,而不是客户端浏览器的加密套件。
- # ssl_session_timeout 60m; #缓存有效期
- # ssl_session_cache shared:SSL:10m; #储存SSL会话的缓存类型和大小
- # location / {
- # root html;
- # index index.html index.htm;
- # }
- #}
- }
复制代码
总结配置文件包含了以下一些考虑点: - 反向代理
- 压缩
- 连接数
- 浏览器版本过低重定向
- 头部缓存及其他一些缓存设置(性能优化)
- 负载均衡的写法(注释了)
- https的写法(注释了)
至此,公司的网站已经跑起来了。若觉得有用就保留一份吧,没用就当冲浪吧;
抽空写个Typescript 2+Angular 2&4的系列教程。。。这篇文章也算是一个铺垫吧
本帖由 kafka_hadoop 于 2017-3-9 11:51 编辑
|
|